Stent & Catheter

Hydrophilic Double J stent

Features:
The hydrophilic coating and super-smooth surface allow it to pass through the ureteral
tube without causing friction. For this purpose, when a liquid comes in contact with the
the surface of the stent in such a way that its hydrophilic coating is activated, it creates a
layer between the stent and the body tissue, which ultimately leads to comfortable
placement without pain and friction.
Uniform coating of hydrophilic material along the entire stent length causes it to be more slippery than similar goods. Which ultimately leads to comfortable placement
without pain and friction.
This product is used for short-term stenting.
This product is made of aliphatic polyurethane material.
Uniform coating of hydrophilic material along the entire stent length makes it more slippery than similar goods.
Its conical tip facilitates the passage of ureteral tube obstructions. The particular polymer
structure used increases the softness of the tube by 40% at body temperature. The powerful radio pack feature of this product makes it easily visible under X-rays and during placement with a fluoroscope. It has discharge holes in the body and head of the stent.

Anti-Microbial Double J stent

Features:

Antimicrobial coating prevents the growth of common organisms on or around the stent.
In this product, the gradual release of antimicrobial substances minimizes the possibility
of toxicity in body tissues. The effect of this coating is 30 days, so it is recommended for
short-term use. The antimicrobial coating is based on the technology of hydrophilic
coatings and its production process is done in the safety and cleanliness and it does not
contain any combination of organic solvents.
The antimicrobial coating has a completely integrated structure and does not lose its
physical structure during prolonged use. The antimicrobial coating uses hydrophilic
polymers that reduce the patient’s wounds and facilitate device placement. This product is made of aliphatic polyurethane material. The smooth surface of the stent reduces the
physical damage caused by the placement and prevents ureteral reactions that cause
ureteral ulcers, swelling and inflammation. The conical tip of this product facilitates the
passage of ureteral tube obstructions. The special polymer structure of this product
increases the softness of the tube by about 40% at body temperature, which provides
patient comfort. The special design of the two ends of the stent prevents its transfer and
displacement in the body after implantation. This product has a strong radio pack feature
so that it can be easily seen under X-rays and during placement with a fluoroscope.
This stent has discharge holes in the body and head.

Carbon-Coated Double J stent

Features:

-This product has the ability to last in the body, for long treatments for more than 10
months.
This product has an innovative coating to solve the problem of calcium salt accumulation
on the stent. The special formula used in the coating on the stent regulates the p-hatch
around the stent and prevents the formation of calcium salts and prevents the stent from
being in an acidic and alkaline environment, which causes the stent to deteriorate. This
product is made of aliphatic polyurethane material. This stent has a super smooth surface.
The smooth surface of the stent reduces the physical damage caused by the placement
and prevents ureteral reactions that cause ureteral ulcers, swelling and inflammation. The
conical tip of this product facilitates the passage of ureteral tube obstructions. The special
polymer structure of this product increases the softness of the tube by about 40% at body
temperature, which provides patient comfort. The special design of the two ends of the
stent prevents its transfer and displacement in the body after implantation. This product
has a strong radio pack feature so that it can be easily seen under X-rays and during
placement with a fluoroscope. This stent has discharge holes in the body and head.

Guidwire

Features:

-Made of the best stainless steel material with Teflon coating (PTFE) by Pre-coated
method.
-It can be ordered in two types of J-shaped heads and flat heads.
-To facilitate the placement of the guide wire by the doctor, you have a soft head and a
hard head.
-Packed in a protective sheath to prevent possible breakage during transport.
-It has perfectly rounded tips to prevent damage to the weave.
-It is made uniformly to ensure coordination with all Teflon coating inserts.
-The guide wire has the same torque at the beginning and end.
-This product can be ordered in different sizes and lengths
-This product is sterilized by ethylene oxide gas.

Ureter Catheter

Features:

–This product is produced with the feature of radio pack and also steel guide with brass
handle.
-The hydrophilic coating of this product facilitates easy placement without the need for
lubricant gel for the doctor.
-This product has an end connector for easy connection to other medical equipment.
-This catheter is included in its first 50 cm.
-Sterile warranty for 3 years if stored under the desired conditions on the packaging
surface and also the packaging is open or undamaged.
-A smooth surface that prevents physical damage from catheter surface contact with body
tissues during implantation and prevents ureteral reactions that cause ureteral ulcers,
swelling, and inflammation.
-Its conical tip facilitates the passage of ureteral tube obstructions.
-With a high radiopaque property that distinguishes the catheter completely under X-rays
and also during placement through a fluoroscope.
-It has 360 degree printing for accurate and convenient placement.
-It has a hole in the tip for urine to enter, which is created by the drain system.
Sterilized by ethylene oxide gas

Shopping Basket

Our goal is to help people in the best way possible. this is a basic principle in every case and cause for success. contact us today for a free consultation.